Country Home Products DR 4 -TON Operations Instructions download pdf (Page 38)

34 DR

FIELD and BRUSH MOWER

Removing the Wheels

BEFORE PERFORMING ANY MAINTENANCE

PROCEDURE, STOP THE ENGINE AND

DISCONNECT

THE SPARK PLUG WIRE(S).

Adjusting the Parking Brake

BEFORE PERFORMING ANY MAINTENANCE

PROCEDURE, STOP THE ENGINE AND DISCONNECT

THE SPARK PLUG WIRE(S).

Figure 27

Adjust Parking

Brake Nut

Tool Needed:

• 3/4" socket with extension

1. Loosen the wheel nuts a couple of turns with the

wheel on the ground.

2. Block the machine so the wheel to be removed is

off the ground.

3. Remove the three nuts and slide the wheel off

(Figure 27).

4. Replace the wheel and finger-tighten the wheel

nuts before unblocking the machine.

5. Tighten the wheel nuts with the wheel resting on

the ground.

Remove Nuts

Tool Needed:

• 1/2" open end wrench

To adjust the parking brake, tighten or loosen the nut

shown in Figure 28.

Tightening the nut (clockwise)

will increase pressure and loosening the nut

(counterclockwise) will decrease the pressure on the

brake pad.

Figure 28

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

Country Home Products DR 4 -TON Operations Instructions Page 38