Country Home Products TLC18-CHP Instruction Manual download pdf (Page 15)

LUBRICATION AND MAINTENANCE

OPERATION

TIME

PROCEDURE

COMMENTS

BREAK-IN

Change engine oil and filter after first 5

hours.

Check belt tension.

Check all nuts and bolts for tightness.

Per manufacturer’s specifications.

Adjust as required.

Tighten if necessary.

8 HOURS

Check engine oil.

Check chipper knives gap and edge.

Clean air filter.

Remove hubs from axle and grease.

Grease flywheel shaft bearings. (1)

Do not over fill.

See knife maintenance section.

More often if needed.

Anti seize compound.

Good grade multi-purpose lithium

grease.

40 HOURS

Change engine oil. (2)

Check tire pressure.

Remove and sharpen or replace

chipper knives.

Per manufacturer’s specifications.

Add or adjust as required.

See knife maintenance section.

100 HOURS

Replace belt.

Change engine oil.

Order replacement part.

Per manufacturer’s specifications.

200 HOURS

Clean and adjust spark plug.

Per manufacturer’s specifications.

(1) Two pumps of hand gun. DO NOT over-grease as this may damage seal.

(2) Depending on climate and environment, lubrication may be required every 8 to 40 hours.

ACCESSORIES FOR C182-CHP

Water resistant fitted cover Order Part No. 913-0069

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Country Home Products TLC18-CHP Instruction Manual Page 15

Comments to this Manuals

Related products and manuals for Garden shredders Country Home Products TLC18-CHP